Wayncor™ 240 – Corrosion Inhibitor Pigment
Wayncor™ 240 is a white Basic Zinc Molybdate anti-corrosive pigment which imparts good corrosion resistance to protective primers. It has a wide variety use in thermo set and thermo plastic systems. It can be used alone or in conjunction with other anti-corrosive additives. The typical use level for this product is between 3 – 7% based on total formula weight. It has a small particle size and narrow distribution which will permit it to be used in wash primers, DTM, or primer applications.
|Characteristic||Test Method||Typical Value|
|Zinc Oxide [%]||67.3 - 73.3|
|Dimolybdenum trizinc nonaoxide [%]||26.0 - 28.0|
|Inorganic Additive [%]||2.6 - 2.8|
|Bulking Value [gal/lb] [l/kg]||0.023
|6.0 - 8.0|
|Conductivity [micro Siemens]||ASTM
|Loss on Ignition at 600°C [%]||ASTM
|Moisture at 110°C [%]||ASTM
|Oil Absorption [lbs/100 lbs] [kg/100kg]||ASTM
|19 – 32
19 – 32
|Apparent Bulk Density, Tapped [g/100 cm³]||40 – 95|
|Fineness of Grind [Hegman Value]||ASTM
|Mean Particle Size [microns]||Malvern
These are typical values and do not represent specifications.
- Long oil alkyds
- High solid alkyds
- Solvent based 2K epoxies
- High solid epoxies
Performance in other systems has not been fully evaluated.
The information made herein is based upon our research and the research of others, and is believed to be accurate. No guarantee of accuracy is made and the product discussed is sold without warrant, expressed or implied and upon the condition the purchaser shall make their own tests to determine the suitability of such product for their particular purposes.