Wayncor™ 213 – Corrosion Inhibitive Pigment
Wayncor™ 213 is a general purpose corrosion inhibitive pigment which demonstrates good stability and corrosion resistance in a wide variety of systems. Typical use level is between 3 – 7% total formula weight.
|Characteristic||Test Method||Typical Value|
|Calcium as CaO [%]||47 - 49|
|Phosphate as P₂O₅ [%]||22 - 24|
|Silicate as SiO₂ [%]||22.5 - 24.5|
|Bulking Value [gal/lb] [l/kg]||[gal/lb] 0.044
|7.5 - 9.5|
|Conductivity [micro Siemens]||ASTM
|Loss on Ignition 600°C [%]||ASTM
|Moisture at 110°C [%]||ASTM
|Oil Absorption [lbs/100 lbs] [kg/100 kg]||ASTM
|[lbs/100 lbs] 38 - 52
[kg/100 kg] 38 - 52
|Apparent Bulk Density, Tapped [g/100 cm³]||30 - 56|
|Fineness of Grind [Hegman Value]||ASTM
|Mean Particle Size [microns]||Malvern
These are typical values and do not represent specifications.
- Short and Medium Oil Alkyds
- Long Oil Alkyds
- Epoxies – solvent and water based
- Chlorinated Polymers
- Alkyd Emulsions
- Epoxy Dispersions
- Acrylics and Modified Acrylics
- Baking Enamels
Performance in other systems has not been fully evaluated.
The information made herein is based upon our research and the research of others, and is believed to be accurate. No guarantee of accuracy is made and the product discussed is sold without warrant, expressed or implied and upon the condition the purchaser shall make their own tests to determine the suitability of such product for their particular purposes.